Whiting - 1/2 Kilo tub

Description

Used to clean flux and cement residue from leaded panels. Sprinkle onto your panel, after you have picked off the excess cement, and scrub with a natural bristle brush.

INSTRUCTIONS

LEADED GLASS CLEAN UP: Sprinkle dry over the entire surface. Rub with soft cloth or stiff soft-bristled brush. Wipe clean.

CHANGING PUTTY CONSISTENCY: 1 Take gold ball size putty in the palm and knead by rolling back and forth into "snake." Putty should heat to 98 degrees body temp.

IF TOO SOFT AND HARDER CONSISTENCY IS DESIRED: 2. Drop "snake" or a ball into WHITING CONTAINER to a coat & repeat the kneading process.

Whiting will be absorbed by putty.

CAUTION! Keep out of reach of children.

Contains powdered calcium carbonate. Causes Lung Cancer. Contains Crystaline Silica. Harmful if swallowed. Eye, ear, and respiratory tract iritant.

Repeated or prolonged breathing of dry powders should be avoided. Wear satety glasses & NIOSH-approved dust/fume mask.

FIRST-AID MEASURES

EYE CONTACT. Immediately flush with water. Continue flushing for at least 15 minutes. Get medical attention if irritation persists.

INGESTION: Immediately rinse mouth out with plenty of water. If within 30

math to an unconscious person.

minutes after ingestion, give a small glass of water. NEVER give anything by

becomes difficult.

INHALATION: Remove to fresh air. Seek medical attention if breathing

MEDICAL EMERGENCIES (24 HRS):