Studio Pro Soldering Iron stand

The Studio Pro™ Soldering Iron Stand is well-balanced for stability. The heavy wire cage prevents the hot soldering iron from touching the work surface, pri and nearby objects. The convenient sponge and sponge-well allows for quint and cleaning of the soldering iron during use.

Instructions:

1. Assemble/the soldering iron stand by removing the nut from the threaded support of the wire cage.
2. nsert the threads of the cage support into the hole located on the base of the stand behind the sponge well.
3. Turn the stand over and screw the nut clockwise until snug, making sure the cage is facing forward before completely tightening down the nut.
4. Place the small, rectangular cleaning sponge into the well located in the front of the base. Wet the sponge before use with water.
5. To clean soldering iron, wipe tip against the wet sponge during soldering.
6. Excess solder can be removed by tapping the tip of the soldering iron on the metal base and allowing solder to drop into the center well.

CAUTION:

• Wear safety goggles when using glass crafting tools.
  Coils of the Soldering Iron Stand will become hot with use.
• Never touch the coils after iron has been placed into the stand.
• Keep work area safe; use a heat resistant work surface.
• Adult supervision should be used at all time for children under 13 years of age when working with glass crafting tools.